2009

• T Bai, LC Brinson, et al., “Planar Aqueous Electrode Technique for Polymer Impedance Spectroscopy,” POLYMER ENGINEERING AND SCIENCE 49, no. 3 (March 2009): 441-453. 
• R Qiao and LC Brinson, “Simulation of interphase percolation and gradients in polymer nanocomposites,” COMPOSITES SCIENCE AND TECHNOLOGY 69, no. 3-4 (March 2009): 491-499. 
• XY Chen, IJ Beyerlein, and LC Brinson, “Curved-fiber pull-out model for nanocomposites. Part 2: Interfacial debonding and sliding,” MECHANICS OF MATERIALS 41, no. 3 (March 2009): 293-307. 
• XY Chen, IJ Beyerlein, and LC Brinson, “Curved-fiber pull-out model for nanocomposites. Part 1: Bonded stage formulation,” MECHANICS OF MATERIALS 41, no. 3 (March 2009): 279-292. 
• YL Guo, LC Brinson et al., “Modeling Mechanical Aging Shift Factors in Glassy Polymers During Nonisothermal Physical Aging. I. Experiments and KAHR-a(te) Model Prediction,” JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS 47, no. 3 (February 1, 2009): 340-352. 
• LC Brinson and M Panico, “Comments to the paper "Differential and integrated form consistency in 1-D phenomenological models for shape memory alloy constitutive behavior" by VR Buravalla and A. Khandelwal [Int. J. Solids and Struct. 44 (2007) 4369-4381],” INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 46, no. 1 (January 1, 2009): 217-220.

2008

• M Panico and LC Brinson, “Computational modeling of porous shape memory alloys,” INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 45, no. 21 (October 15, 2008): 5613-5626. 
• KW Putz, LC Brinson, et al., “Effect of cross-link density on interphase creation in polymer nanocomposites,” MACROMOLECULES 41, no. 18 (September 23, 2008): 6752-6756. 
• R Qiao and LC Brinson, “Comment on: A correction to the Brinson's evolution kinetics for shape memory alloys,” JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES 19, no. 9 (September 2008): 1113-1113. 
• H Shen, H Li, and LC Brinson, “Effect of microstructural configurations on the mechanical responses of porous titanium: A numerical design of experiment analysis for orthopedic applications,” MECHANICS OF MATERIALS 40, no. 9 (September 2008): 708-720. 
• LM Hamming, LC Brinson et al., “Mimicking mussel adhesion to improve interfacial properties in composites,” COMPOSITES SCIENCE AND TECHNOLOGY 68, no. 9 (July 2008): 2042-2048. 
• Ramanathan LC Brinson, et al., “Functionalized graphene sheets for polymer nanocomposites,” NATURE NANOTECHNOLOGY 3, no. 6 (June 2008): 327-331. 
• AB Schoch, KR Shull, and LC Brinson, “Junction-controlled elasticity of single-walled carbon nanotube dispersions in acrylic copolymer gels and solutions,” MACROMOLECULES 41, no. 12 (June 24, 2008): 4340-4346. 
• H Liu and LC Brinson, “Reinforcing efficiency of nanoparticles: A simple comparison for polymer nanocomposites,” COMPOSITES SCIENCE AND TECHNOLOGY 68, no. 6 (May 2008): 1502-1512.
• K Wakabayashi, C Pierre, DA Dika, RS Ruoff, T Ramanathan, LC Brinson, JM Torkelson., “Polymer-graphite nanocomposites: Effective dispersion and major property enhancement via solid-state shear pulverization,” MACROMOLECULES 41, no. 6 (March 25, 2008): 1905-1908. 
• ED Spoerke, NGD Murray, H Li, LC Brinson, DC Dunand, SI Stupp., “Titanium with aligned, elongated pores for orthopedic tissue engineering applications,” JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A 84A, no. 2 (February 2008): 402-412.  

2007

• M.Panico,L.C.Brinson,"A three-dimensional phenomenological model for martensite reorientation in shape memory alloys", in revision for Journal of the Mechanics and Physics ofSolids, 2007.
• L. S. Schadler, L. C. Brinson, W. G. Sawyer, "Polymer Nanocomposites: A Small Part of the Story", Journal of Materials, 2007.
• L. Catherine Brinson Erik D. Spoerke, Naomi G. D. Murray, Huanlong Li, L. Catherine Brinson, David C. Dunand, and Samuel I. Stupp, "Titanium with Aligned, Elongated Pores for Orthopedic Tissue Engineering Applications", Journal of Biomedical Materials Research, in press 2007.
• H. Shen and L. C. Brinson, "A numerical investigation of the effect of boundary conditions andrepresentative volume element size for porous titanium", J. Mech. Matlts. Struct., 1 (7): 1179- 1205, (2007).
• T. Ramanathan, S Stankovich, S.T. Nguyen, R.S. Ruoff and L.C. Brinson, "Graphitic nanofillers in PMMA nanocompositesoAn investigation of particle size and dispersion and their influence on nanocomposite properties," ournal of Polymer Science, Part B: Polymer Physics Aug 1, 2007.
• Gao, X. J., R. Qiao, D. S. Burton and L. C. Brinson, "Phase diagram kinetics for shape memoryalloys: a robust finite element implementation."Journal of Intelligent MaterialSystems and Structures, 2007.
• H. Shen and L. C. Brinson. "Finite element modeling of porous titanium." International Journal of Solids and Structures, in press 2007.
• Putz K. W, T. Ramanathan, Jamison L., L. Catherine Brinson,"Effect of Carbon Nanoparticle Geometry on the Interphase in PMMA Nanocomposites.", Polymer Preprints, 2007.

2006

• T. Ramanathan, A. A. Abdala, S. Stankovich, D. A. Dikin, M. Herrera-Alonso, R. D. Piner, D. H.Adamson, J. Liu, R. S. Ruoff, S. T. Nguyen, I. lhan A. Aksay, R. K. Prudihomme, L. C.Brinson "Beyond Carbon Nanotubes: TEGO Nanoplates for Polymer Nanocomposites," submitted to Nature: Nanotechnology, December, (2006).
• M. E. Kassner, S. Nemat-Nasser, Z. Suo, G. Bao, J. C. Barbour, C. Brinson, H. Espinosa, H. Gao, S. Granick, P. Gumbsch, K. S. Kim, W. Knauss, L. Kubin, J. Langer, B. C. Larson, L.Mahadevan, A. Majumdar, S. Torquato, F. van Swol, "New Directions in Mechanics," Mechanicsof Materials, 37 (2-3): 231-259 (2006).
• Gao, X. J., D. S. Burton, T. Turner and L. C. Brinson, "Finite Element Simulation of AdaptiveStiffening of SMA Composite Beams," J. Engineering Matls & Technology, 128 (3): 285-293,(2006).
• Z.He.K.R.GallandL.C.Brinson,"Use of Electrical Resistance Testing to Redefine the transformation Kinetics and Phase Diagram for SMAs," Metall. Mater. trans. A, 37A (3): 579- 587 (2006).
• H. Shen, S. M. Oppenheimer, D. C. Dunand and L. C. Brinson, "Numerical Modeling of Pore Size and Distribution in Foamed Titanium," Mechanics of Materials, 38 (8-10): 933-944 (2006).
• A. Eitan, F. T. Fisher, R. Andrews, L. C. Brinson, L. S. Schadler, "Reinforcement Mechanisms in MWCNT-Filled Polycarbonate," Composites Science and Technology, v. 66, pp 1162-1173,(2006).
• McVeigh, C., F. Vernerey, W. K. Liu and L. C. Brinson, "Multiresolution analysis for materialdesign," Comput. Methods Appl. Mech. Engrg., 195 (37-40): 5053-5076 (2006).
• D. Burton, X. Gao, L. C. Brinson, Finite element simulation of a self-healing shape memory alloy composite, Mechanics of Materials vol. 38, pp. 525-537 (2006).
• E. Patoor, D.C. Lagoudas, P.B. Entchev, L.C. Brinson, X. Gao, "Shape memory alloys, Part I:General properties and modeling of single crystals," Mechanics of Materials vol 38, pp. 391-429(2006).
• E. Patoor, D.C. Lagoudas, P.B. Entchev, L.C. Brinson, X. Gao, "Shape memory alloys, Part II:Modeling of polycrystals," Mechanics of Materials vol 38, pp. 430-462 (2006).
• T. Ramanathan, H. Liu and L. C. Brinson, "Functionalized SWNT polymer nanocomposites for dramatic property improvement", Journal of Polymer Science, Part B: Polymer Physics Jan 15, 2006.
• H. Liu, T. Ramanathan and L. C. Brinson, "A Hybrid Numerical-Analytical Method for Modeling the Viscoelastic Properties of Polymer Nanocomposites",Journal of Applied Mechanics v. 73 no. 5, p. 758-68, 2006.

2005

• F. T. Fisher and L. C. Brinson, Nanomechanics of Nanoreinforced Polymers, Handbook of Theoretical and Computational Nanoscience, M. Rieth and W. Schommers, editors, (2005).
• T. Ramanathan, F.T. Fisher, R.S. Ruoff, and L.C. Brinson, "Amino-functionalized Carbon Nanotubes for Binding to Polymers and Biological Systems", Chemistry of Materials v. 17, pp. 1290-1295 (2005).
• Spoerke, E.D., N.G. Murray, H. Li, C.L. Brinson, D.C. Dunand and S.I. Stupp, Organoapatite-Titanium Foam: A Bioactive Composite for Orthopedic Tissue Engineering, in Acta Biomaterialia, (2005).

2004

• X. Gao, D. Burton, L. C. Brinson, "Finite element simulation of a self-healing shape memory alloy compositedf" Mechanics of Materials, in press (2004).
• Huanlong Li, Scott M. Oppenheimer, Samuel I. Stupp, David C. Dunand, L. Catherine Brinson, "Effects of pore morphology and bone ingrowth on mechanical properties of Microporous Titanium as an Orthopaedic Implant Material," Jap. Materials transactions, Special Issue on "Frontiers of Smart Biomaterials" 45 (4): 1124-1131 (2004).
• Fisher, F. T., Brinson, L. C., Eitan, A. and L. S. Schadler, "Reduced polymer chain mobility in low volume fraction carbon nanotube reinforced polycarbonate: spectral response and effective viscoelastic properties," Advanced Composite Letters, in press (2004).
• S. Thelen, F. Barthelat and L. C. Brinson, "Mechanics Considerations for Microporous Titanium as an orthopedic implant material", J. Bio Mat. Res., vol. 69A(4), pp. 601-610, (2004).
• L. C. Brinson, I. Schmidt, R. Lammering, Micro and Macromechanical Investigations of transformation Behavior of a Polycrystalline NiTi Shape Memory Alloy Using in situ Optical Microscopy, J. Mechanics and Physics of Solids, vol. 52:7, pp. 1549-1571 (2004).

2003

• W. Ding, A. Eitan, F.T. Fisher, X. Chen, D.A. Dikin, R. Andrews, L.C. Brinson, L.S. Schadler, and R.S. Ruoff, "Direct observation of polymer sheathing in carbon nanotube-polycarbonate composites," Nano Letters,3 (11), pp. 1593-1597, (2003).
• Xu, Terry T., F. T. Fisher, L. C. Brinson, R. S. Ruoff, "Bone-shaped Nanomaterials for Nanocomposite Applications," Nanoletters, 3 (8): pp. 1135-1139, (2003).
• Fisher, F. T., R. D. Bradshaw, L. C. Brinson. "Fiber Waviness in Nanotube-Reinforced Polymer Composites: I. Modulus predictions using effective nanotube properties," Composites Science and Technology, 63 (11): pp. 1689-1703 (2003)..
• R. D. Bradshaw, Fisher, F. T., L. C. Brinson. "Fiber Waviness in Nanotube-Reinforced Polymer Composites: II. Modeling Via Numerical Approximation of the Dilute Strain Concentration Tensor," Composites Science and Technology, 63 (11): pp. 1705-1722 (2003)..
• Akshantala, N. and L. C. Brinson, "Experimental Study of Viscoelastic Effects and Aging on Elevated Temperature Damage and Failure in Polymer Composites", Mechanics of Time Dependent Materials, vol 7, pp. 1-19 (2003).

2002

• L. C. Brinson, I. Schmidt, R. Lammering, Micro and Macromechanical Investigations of CuAlNi Single Crystal and CuAlMnZn Polycrystalline Shape Memory Alloys, Journal of Intelligent Material Systems & Structures, 13 (12): pp. 761-772 (2002).
• Fisher, F. T., R. D. Bradshaw, L. C. Brinson (2002). Effects of Nanotube Waviness on the Mechanical Properties of Nanoreinforced Polymers. Applied Physics Letters ,vol. 80, pp. 4647-4649.
• X. Gao and L. C. Brinson, A Simplified Multivariant SMA Model Based on Invariant Plane Nature of Martensitic transformation, J. Intell. Mater. Syst. Struct., 13 (12): pp. 795-810 (2002)..
• M. Brocca, L. C. Brinson, Z. P. Bazant, Three Dimensional Constitutive Model for Shape Memory Alloys Based on Microplane Model, J. Mech. Physics Solids., vol. 50, pp. 1051-1077, (2002).

2001

• F. Fisher and L. C. Brinson, Viscoelastic Interphases in Polymer Matrix Composites: Theoretical Models and Finite Element Analysis, Composite Science and Technology, vol.. 61, pp. 731-748 (2001).
• Akshantala, N. and L. C. Brinson, "A Damage Evolution Model for Aging Viscoelastic Composite Laminates," Journal of Composite Technology and Research, vol. 23, pp. 3-14 (2001).

2000

• X. Y. Zhang, L. C. Brinson and Q. P. Sun, "The Variant Selection Criterion in Single Crystal CuAlNi Shape Memory Alloys", Journal of Smart Materials and Structures, vol. 9, pp. 571-581, (2000).
• Gao, X., M. Huang, and L.C. Brinson, A Multivariant Micromechanical Model for SMAs: Part 1: Crystallographic issues for single crystal model. Int. Journal of Plasticity, vol. 16, pp. 1345-1369 (2000).
• Huang, M.S., X. Gao, and L.C. Brinson, A Multivariant Micromechanical Model for SMAs: Part 2: Polycrystal Model. Int. J. Plasticity, vol. 16, pp. 1371-1399, (2000).
• L. C. Brinson and T. S. Gates, "Viscoelasticity and Aging of Polymer Matrix Composites." Chapter in Comprehensive Composite Materials, pp. 333-368, (2000).

1999

• Bradshaw, R. D. and L. C. Brinson, "Mechanical Response of Linear Viscoelastic Composite Laminates Incorporating Nonisothermal Physical Aging Effects," Composite Science and Technology, vol. 59, pp. 1411-1427, (1999).
• Bekker, A., L. C. Brinson, K. Issen, "Localized and Diffuse Thermoinduced Phase transformation in 1D Shape Memory Alloys",Journal of Intelligent Material Systems & Structures, vol.9, pp. 355-365, (1999).
• Bradshaw, R. D. and L. C. Brinson, "A Continuous Test Data Method to Determine a Reference Curve and Shift Rate for Isothermal Physical Aging", Polymer Engineering & Science, vol. 39, pp. 211-235, (1999).

1998

• Belytschko, T., A. Bayliss, C. Brinson, S. Carr, W. Kath, S. Krishnaswamy, B. Moran, J. Nocedal and M. Peshkin, "Mechanics in the Engineering First Curriculum at Northwestern University", International Journal of Engineering Education, Vol. 13:6, (1998).
• Bekker, A. and L. C. Brinson, "Phase Diagram Based Description of the Hysteresis Behavior of Shape Memory Alloys", Acta Materialia, vol. 46, pp. 3649-3665, (1998).
• Huang, M., Brinson, L. C., "A Multivariant Model for Shape Memory Alloys", J. Mechanics & Physics of Solids, vol. 46:8, pp. 1379-1409, (1998). postscript version also available (828 k)
• Brinson, L. C., W. S. Lin, "Comparison of Micromechanics Methods for Effective Properties of Multiphase Viscoelastic Composites", Composite Structures,vol. 41, pp. 353-367, (1998).

1997

• Gates, T. S., Veazie, D. R., and Brinson, L. C., "Creep and Physical Aging in a Polymeric Composite: Comparison Between Tension and Compression," Journal of Composite Materials , Vol. 31, pp. 2478-2498, (1997).
• Bradshaw, R. D. and L. C. Brinson, "A Sign Control Method for Fitting and Interconverting Material Functions for Linear Viscoelastic Solids." Mech. Time Dep. Matls. , vol. 1, pp. 85-108, (1997).
• Brinson, L. C., T. Belytschko, B. Moran, T. Black, "Design and Computational Methods in Basic Mechanics Courses", Journal of Engineering Education, April, pp. 159-166, (1997).
• Bradshaw, R. D. and L. C. Brinson, "Recovering Nonisothermal Physical Aging Shift Factors Via Continuous Test Data: Theory and Experimental Results," J. Engr. Matls. Tech., vol. 119, pp. 233-241, (1997).
• Bekker, A. and L. C. Brinson. "Temperature Induced Phase transformation in a Shape Memory Alloy: Phase Diagram Kinetics Approach." Journal of the Mechanics & Physics of Solids , vol. 45, pp. 949-988, (1997).
• Brinson, L. C., Huang M. S., "Analysis of Controlled Beam Deflection Using SMA Wires," Journal of Intelligent Materials and Structures, Vol. 8, Jan. 1997.
• R. D. Bradshaw and Brinson, L. C., "Physical Aging in Polymers and Polymer Composites: An Analytis and Method for Time-Aging Time Superposition," Polym. Eng Sci. vol. 37, pp.31-44 (1997). The program that was used to create the results shown in the article is called PHYAGE. Download PHYAGE as a ZIP file (490k)

1996

• Brinson, L. C. and M. S. Huang 1995. "Simplifications and Comparisons of Shape Memory Alloy Constitutive Models," J. Intell. Matl. Syst. & Struct., vol. 7, pp. 108-114, (1996). postscript version also available (779 k)
• Brinson, L. C., S. Hwang, and A. Bekker, "Temperature Induced Deformation in Shape Memory Alloys Under Load," Journal of Intelligent Material Systems & Structures , vol. 7, pp. 97-107, (1996).
• Brinson, L. C., M. S. Huang, C. Boller, W. Brand, "Analytical treatment of Controlled Beam Deflections using SMA Wires," Journal of Intelligent Material Systems & Structures , vol. 8, pp. 12-25, (1996).

1995

• Brinson, L. C. and T. S. Gates, "Effects of Physical Aging on Long-Term Creep Behavior of Polymers and Polymer Matrix Composites," International Journal of Solids and Structures, vol 32, pp. 827-846, (1995).

1994

• Monaghan M. R., Brinson, L. C., and R.D. Bradshaw "Analysis of Variable Stress History on Polymeric Composite Materials with Physical Aging," Composites Engineering vol. 4:10, pp. 1023-1032, (1994).

1993

• Brinson, L. C. and R. Lammering, "Finite Element Analysis of the Behavior of Shape Memory Alloys and their Applications." International Journal of Solids and Structures vol. 30:23, pp. 3261-3280 (1993).
• Brinson, L. C., "One Dimensional Constitutive Behavior of Shape Memory Alloys: thermo-mechanical derivation with non-constant material functions." Journal of Intelligent Material Systems & Structures , vol. 4:2, pp. 229-242 (1993).

1992

• Brinson, L. C. and W. G. Knauss, "Finite Element Analysis of Multi-Phase Viscoelastic Solids," Journal of Applied Mechanics vol. 59:4, pp. 730-737 (1992).

1991

• Brinson, L. C. and W. G. Knauss, "Thermorheologically Complex Behavior of Multi-Phase Viscoelastic Materials." Journal of the Mechanics and Physics of Solids vol. 39, No. 7, pp. 859-880 (1991).