Jian Cao | Home | Research | People | Publications | Facilities | Links | Contact Us

Jian Cao

Home

Research

People

Publications

Facilities

Links

Contact Us

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Referred Conference Publications
 
 
  1. Jian Cao, Wonoh Lee, Hang S. Cheng, Hui-ping Wang and Kwansoo Chung, “Experimental and Numerical Investigation of Combined Isotropic-kinematic Hardening Behavior”, in Mechanics and Mechanisms of Finite Plastic Deformation, edited by A.S. Khan and B. Farrokh, Proceedings of PLASTICITY ’08: The 14th International Symposium on Plasticity and its Current Applications in Kailua-Kona, Hawaii, U.S.A., Jan. 3-8, 2008, Neat Press, Fulton, Maryland, 2008, pp.109-111.
  2. Wonoh Lee, Jian Cao, Pierre Badel and Philippe Boisse, “Non-orthogonal Constitutive Model for Woven Composites with Considering Tensile Effect on Shear Behavior”, in The 11th ESAFORM Conference on Material Forming, Proceedings of ESAFORM 2008 in Lyon, France, Apr. 23-25, 2008, (accepted).
  3. W. Lee, J. Padvoiskis, J. Cao, E. de Luycker, P. Boisse, F. Morestin, J. Chen and J. Sherwood, “Bias-extension of woven composite fabrics”, in The 11th ESAFORM Conference on Material Forming, Proceedings of ESAFORM 2008 in Lyon, France.
  4. Hui-Ping Wang, Siguang Xu, Jian Cao, Wayne Chen, Hang S. Cheng, “A Study on a Surface Distortion Predictor for Sheet Metals: validation in Yoshida Buckling Problems”, in 2008 NUMISHEET.
  5. Parasiz, S.A., Kinsey, B., Krishnan, N. and Cao, J. (2007) “Characterization and Investigation of Deformation during Microextrusion using X-ray Texture Analysis”, ASME International Manufacturing Science and Engineering Conference, Atlanta, Georgia.
  6. Huang, Y., Wang, Y.J., Cao, J. and Li, M. (2007) “Prediction of Forming limit in Single Point Incremental Forming with the Ductile Fracture Criterion,” ASME International Manufacturing Science and Engineering Conference, Atlanta, Georgia.
  7. Davis, T., Cao, J., Chen, W., Wang, Q., Xia, C., Talwar, R. and Lederich, R. (2007) “Effect of Micro Manufacturing Processes on Surface Behavior,” ASME International Manufacturing Science and Engineering Conference, Atlanta, Georgia.
  8. Mahayotsanun, N, Krishnan, N., Cao, J. and Ehmann, K. (2007) “Study of Strain Rates and Size Effects in the Microextrusion Process: Part I - Development of a Microextrusion Machine,” 2nd International Conference on Micromanufacturing, Clemson, South Carolina.
  9. Parasiz, S.A., Kinsey, B., Mahayotsanun, N. and Cao, J. (2007) “Dependence of Deformation on Grain Size and Sample Size in Microextrusion,” 2nd International Conference on Micromanufacturing, Clemson, South Carolina.
  10. Mahayotsanun, N, Cao, J., Sah, S., Gao, R., and Wang, C.T., (2007) “Integrated Sensing System for Stamping Monitoring and Control,” IEEE SENSORS 2007, Atlanta, Georgia.
  11. Lee, W., Cao, J., Chen, J. and Sherwood, J.A. (2007) “Numerical Analysis on Double Dome Stretching Tests of Woven Composites”, ESAFORM Conference, Zaragoza, Spain, ISBN: 978-0-7354-0414-4, pp. 1052-1057.
  12. Cheng, H.S., Lee, W., Cao, J., Seniw, M. and Wang, H.P. and Chung, K.S. (2007) “Experimental and Numerical Investigation of Kinematic Hardening Behavior in Sheet Metals”, ESAFORM Conference, Zaragoza, Spain, ISBN: 978-0-7354-0414-4, pp.337 – 342.
  13. Gamache, L., Sherwood, J.A., Chen, J. and Cao, J. (2007) “Characterization of the Fabric/Tool and Fabric/Fabric Friction during the Thermostamping Process”, ESAFORM Conference, Zaragoza, Spain, ISBN: 978-0-7354-0414-4, pp. 1068-1073.
  14. Cheng, H. S., Cao, J. and Wang, H.P. (2006) “Experimental and Numerical Analysis of the Buckling and Post-buckling Phenomena in the Yoshida Test”, ASME International Conference on Manufacturing Science and Engineering, Ypsilanti, Michigan, 2006.
  15. Cao, J., Krishnan, N, Mori, L. and Espinosa H.D. (2006) “Experimental Investigation of the Size Effects Observed in the Extrusion of Micropins”, 1st International Conference on Micromanufacturing, Urbana, Illinois, 2006.
  16. Mahayotsanun, N., Cao, J. and Peshkin, M. (2006) “Characterization of a Draw-in Sensor Built on the Principal of Mutual Inductance”, International Symposium on Flexible Automation, Osaka, Japan.
  17. Liu, L, Chen, J., Zhu, B., Yu, T.X., Tao, X.M., and Cao, J. (2006) “The Yarn-to-Yarn Friction of Woven Fabric”, ESAFORM 2006, Glasgow, U.K.
  18. Buranathiti, T., Cao, J., Xia, Z.C. and Chen, W. (2005) “Probabilistic Design in a Sheet Metal Stamping Process under Failure Analysis”, NUMISHEET, Detroit, MI.
  19. Mahayotsanun, N., Cao, J. and Peshkin, M. (2005) “A Draw-In Sensor for Process Control and Optimization”, NUMISHEET, Detroit, MI.
  20. Krishnan, N., Cao, J., Kinsey, B., Parasiz, S.A. and Li, M. (2005) “Investigation of Deformation Characteristics of Micropins Fabricated Using Microextrusion”, IMECE 2005, Orlando, FL.
  21. Krishnan, N., Cao, J. and Dohda, K. (2005) “Microforming: Study of Friction Conditions and the Impact of Low Friction/High Strength Die Coatings on the Extrusion of Micropins”, IMECE 2005, Orlando, FL.
  22. Hang Shawn Cheng, Jian Cao, Numpon Mahayotsanun (2005) “Experimental Study on Woven Composites with Different Temperature Trajectories”, ESAFORM Conference, April, 2005.
  23. Krishnan, N., Cao, J., Ehmann, K. F. and Owusu-Ofori, S. (2004) “Microforming: Study of grain size and friction effects in the extrusion of micropins”, 4th International Workshop on Microfactories, Shanghai, China, October 15-17, 2004.
  24. Krishnan, N. and Cao, J. (2004) “Experimental Investigation and Comparison of Variable Blank-holder Force Trajectories Using an ARMA Model”, JUSFA 2004, July 19-21, Denver, Colorado.
  25. Liu, W.K., Cao, J. Lu, H.S. and Krishnan, N. (2004) “A Multi-scale Simulation of Microforming Process Using RKEM”, NUMIFORM 2004, June 13-17, Columbus, OH.
  26. Sahai, A., Schramm, U., Buranathiti, T., Chen, W., Cao, J. and Xia, Z.C. (2004) “Sequential Optimization and Reliability Assessment Method for Metal Forming Processes“, NUMIFORM 2004, June 13-17, Columbus, OH.
  27. Cao, J., Cheng, H.S. and Peng, X.Q. (2004) “Experimental Verification for a Non-orthogonal Constitutive Model for Woven Composites”, ESAFORM Conference, April, 2004.
  28. Cao, J. and Cheng, H.S. (2004) “An Accelerated Method for Springback Compensation”, ESAFORM Conference, April, 2004.
  29. J. Cao, H.S. Cheng, T.X. Yu, B. Zhu, X.M. Tao, S.V. Lomov, Tz. Stoilova, I.Verpoest, P. Boisse, J. Launay, G. Hivet, L. Liu, J. Chen, E.F. de Graaf and R. Akkerman (2004) “A Cooperative Benchmark Effort on Testing of Woven Composites”, ESAFORM Conference, April, 2004, p.305.
  30. Cao, Peng, X.Q., Cao, J., Chen, J. (2003) “Stamping Simulation of Woven Composites Using a Non-orthogonal Constitutive Model”, ESAFORM Conference on Material Forming, Italy.
  31. H. Shawn Cheng, Hongsheng Lu, Jian Cao, Wing K. Liu (2003) “Characterization of Wrinkling: Experiments and Simulations”, ESAFORM Conference on Material Forming, Italy.
  32. Krishnan, N., Cao, J., (2002) "Estimation of Optimal Blank Holder Force Trajectories in Segmented Binders Using an ARMA Model", Proceedings of the JSME/ASME Conference on Materials and Processing, Oct 15-18, 2002-Honululu, Hawaii.
  33. Peng, X.Q., Xue, P., Cao, J., Lussier, D. and Chen, J. (2002) “Normalization in the Picture Frame Test of Woven Composites: Length or Area?”, ESAFORM Conference on Material Forming, Krakow, Poland.
  34. Baghdasaryan, L., Chen, W., Buranathiti, T. and Cao, J. (2002) “Model Validation via Uncertainty Propagation using Response Surface Models”, 2002 ASME Design Engineering Technical Conferences, Montreal, Canada.
  35. Buranathiti, T. and Cao, J., Baghdasaryan, L., Chen, W., (2002) “An Approach for Model Validation in Simulating Sheet Metal Forming Processes”, International Conference on Frontiers of Design and Manufacturing, Dalian, China
  36. Krishnan, N and Cao, J. (2002) “Real-time Calculation of Optimal Blank-holder Force History in Sheet Metal Forming Using an ARMA Model”, 2002 Japan US Symposium on Flexible Automation, Hiroshima, Japan.
  37. Li, S.P. and Cao, J (2001) "Enhancement of Coil Stiffness Using a Cardboard Core", 2001 International Mechanical Engineering Congress and Exposition, New York, NY.
  38. Peng, X.Q. and Cao, J. (2001) "Sensitivity Study on Material Characterization of Textile Composite", the First M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, Massachusetts, June 12 - 14, 2001.
  39. Kinsey, B.L. and Cao, J. (2001) "Numerical Simulation and Experimental Implementation of Tailor Welded Blank Forming", Second Global Conference on Processing & Manufacturing of Sheet Metals, 2001 TMS Annual Meeting, New Orleans, Louisiana, February 11-15,2001.
  40. Peng, X.Q., Lussier, D., Cao, J. and Chen, J. (2001) "Material Behavior Characterization of Textile Composite Sheets: Experiments and Simulation", Second Global Conference on Processing & Manufacturing of Sheet Metals, 2001 TMS Annual Meeting, New Orleans, Louisiana, February 11-15,2001.
  41. Song, N., Qian, D., Cao, J., Liu, W., Viswanathan, V. and Li, S.F. (2000) "Effective Models for Prediction of Springback in Flanging", Symposium on Advances in Metal Forming, American Society of Mechanical Engineers, Orlando, Florida.
  42. Peng, X.Q. and Cao, J. (2000) "Numerical Determination of Mechanical Elastic Constants of Textile Composites", 15th Annual Technical Conference of the American Society for Composites, College Station, Texas, Sept. 25-27, 2000.
  43. Lee, L.H., Cao, J., Xia, Z.C. and Tang, S.C. (2000) "Reduction of Forming Steps of an Axisymmetric Multi-step Drawing Problem via Numerical Modeling", 2000 Society of Automotive Engineers International Congress & Exposition, Detroit, MI.
  44. Cao, J., Kinsey, B.L., Song, N. and Yao, H. (2000) "Next Generation Stamping Dies - Flexibility and Controllability', International Conference of Flexible Automation & Intelligent Manufacturing, College Park, Maryland.
  45. Kinsey, B., Song, N., and Cao, J. (1999) “Analysis of Clamping Mechanism for Tailor Welded Blank Forming”, 1999 International Body Engineering Conference, paper No. 99IBECC_26, Detroit, MI.
  46. Cao, J., Liu, Zhihong, Liu, W.K. (1999) “Prediction of Springback in Straight Flanging”, Symposium on Advances in Sheet Metal Forming, 1999 ASME IMECE Winter Conference.
  47. Cao, J., Karafillis, A. and Ostrowski, M. “Prediction of Flange Wrinkles in Deep Drawing”, Advanced Methods in Materials Processing Defects, ed. Predeleanu and P.Gilormini, 1997.
  48. Cao, J., Karafillis, A. and Boyce, M. “Prediction of Forming Limit Diagram using KB yield Criterion”, International Symposium on Plasticity and its Current Applications, 1997.
  49. Kinsey, B. and Cao, J. “An Experimental Study to Determine the Feasibility of Implementing Process Control to Reduce Part Variation in a Stamping Plant”, 1997 Society of Automotive Engineers International Congress & Exposition, Detroit, MI.
  50. Cao, J. and Boyce, M., “Design and Control of Forming Parameters Using Finite Element Analysis”, Symposium on Computational Material Modeling, American Society of Mechanical Engineers, Chicago, IL. 1994, pp.265.
  51. Sunseri, M., Karafillis, A., Cao, J. and Boyce, M., “Methods to Obtain the Net Shape in Aluminum Sheet Forming Using Active Binder Force Control”, Symposium on Mechanics of Materials Processing and Manufacturing, 1994. ASME, Chicago, IL.
  52. Cao, J., Bakkestuen, R., Jalkh, P., Boyce, M. and Hardt, D., “Improvement of Forming Height and Stability of Aluminum Parts Using Active Binder Control”, International Deep Drawing Conference, 1994, Lisboa, Portugal.
Jian Cao | Home | Research | People | Publications | Facilities | Links | Contact Us