AML - Library
Books
1. Trajectories, invited article for the "Encyclopedia of Robotics," R. C. Dorf and S. Y. Nof, eds., John Wiley, 3, 1796-1810, (with S. H. Lee and J. Cesarone) (1988). 2. Engineered Surfaces, ASME: PED-Vol. 62, Edited by K. F. Ehmann and W. R. D. Wilson Proceedings of the Symposium on Engineered Surfaces at the ASME Winter Annual Meeting, (1992). 3. Manufacturing Science and Engineering, ASME: PED-Vol. 64, Edited by K. F. Ehmann, (Proceedings of five Symposia at the ASME Winter Annual Meeting), (1993). Papers
1. "A Feasibility Study of On-Line Identification of Chatter in Turning Operations," Transactions of ASME: Journal of Engrg. for Industry, 102(4), 315-321 (with S. M. Wu) (1980). [PDF Version] 2. "Forecasting Control of Machining Chatter," ASME: Computer Appl. in Mfg. Systems, W. R. DeVries, ed., PED - 2, 37-52 (with S. M. Wu) (1980). [PDF Version] 3. "A Comparative Study of Classical Techniques and the Dynamic Data System (DDS) Approach for Machine Tool Structure Identification," Proc. 8th Annual North American Manufacturing Research Conference, Rolla, MO, 401-404 (with S. M. Wu) (1980). [PDF Version] 4. "Analysis of Cutting Process Damping," Proc. 9th Annual North American Manufacturing Research Conference, University Park, PA, 247-249 (with S. M. Wu and P. Balakrishnan) (1981). [PDF Version] 5. "Cutting Process Identification from Closed-Loop Operating Data," Proc. 9th Annual North American Manufacturing Research Conference, University Park, PA, 528-531 (with S. M. Wu and R. C. Gan) (1981). [PDF Version] 6. "Modal Analysis of Mechanical Structures by Time Series Approach," Proc. 10th Annual North American Manufacturing Research Conference, McMaster Univ., Hamilton, Canada, 417-421 (with K. J. Kim and S. M. Wu) (1982). [PDF Version] 7. "Development of a New Milling Cutter for Aluminum Honeycomb," Intl. Journal of Machine Tool Design and Research, 23(2/3), 81-91 (with S. M. Wu and M. Mendoza) (1982). [PDF Version] 8. "Feasibility of Single Pass Boring Operations," Intl. Journal of Machine Tool Design and Research, 23(1), 53-59 (with H. Sun and S. M. Wu) (1982). [PDF Version] 9. "Microcomputer Controlled 7-Axis Drill Point Grinder, Proc. of 14th Natl. SAMPE Tech. Conf., 14, 444-455 (with J. Hawkins and S. M. Wu), October (1982). [PDF Version] 10. "Upgrading Performance of Grinding Machines," Proc. 21st Annual Abrasive Engrg. Soc. Conf./Exhibit, Itasca, IL, 133-139 (with S. M. Wu), April (1983). [PDF Version] 11. "Modal Analysis of Machine Tool Structures Based on Experimental Data," Transactions of ASME: Journal of Engrg. for Industry, 105(5), 282-287 (with K. J. Kim) (1983). [PDF Version] 12. "Chatter Suppression in Turning," Proc. 11th Annual North American Manufacturing Research Conference, Madison, WI, 399-402 (with S. Y. Tsai and S. M. Wu) (1983). [PDF Version] 13. "Forecasting Compensatory Control of Spindle Error Motion in Cylindrical Grinding," ASME: Statistics in Mfg., S. G. Kapoor and M. R. Martinez, eds., PED, 9, 75-81 (with K. H. Kim and S. M. Wu) (1983). [PDF Version] 14. "CAM-Another Viewpoint," Proc.
24th Machine Tool Design and Research Conference, Manchester, 15. "Simulation Study of Forecasting Compensatory Control of Machining Straightness," ASME: Control of Mfg. Processes & Robotic Systems, D. E. Hardt, W. J. Book, eds., Boston, MA, 47-53 (with E. Moon and S. M. Wu) (1983). [PDF Version] 16. "An Extended FFT Algorithm for ARMA Spectral Estimation," IEEE Transactions on Acoustic Speech & Signal Processing, 32(1), 168-170 (with R. C. Gan and S. M. Wu) (1984). [PDF Version] 17. "Identification and Control of Chatter in Turning," Proc. Computer-Based Factory Automation, 11th Conference on Production Research and Technology, Pittsburgh, PA, 413-417 (1984).[PDF Version] 18. "Identification of Natural Frequencies and Damping Ratios of Machine Tool Structures by DDS," Intl. Journal of Machine Tool Design and Research, 24(3), 161-169 (with K. J. Kim and S. M. Wu) (1984). [PDF Version] 19. "Experimental Complex Modal Analysis of Machine Tool Structures," Computer Integrated Manufacturing and Robotics, M. C. Leu, M. R. Martinez, eds., New Orleans, LA, 243-258, (1984); also in Transactions of ASME: Journal of Engrg. for Industry, 111(2), 116-124, (with Y. C. Shin and S. M. Wu) (1989). [PDF Version] 20. "Implementation of Forecasting Compensatory Control for Machining Straightness," Computer Integrated Manufacturing and Robotics, M. C. Leu, M. R. Martinez, eds., New Orleans, LA, 231-241; (with E. Moon and S. M. Wu) (1984). [PDF Version] 21. "On the Relationship Between Thermal EMF and Vibration in Turning," Proc. 12th Annual North American Manufacturing Research Conference, Houghton, MI, 359-362 (with Z. L. Zhang) 1984).[PDF Version] 22. "Identification of Complex Mode Shapes of Machine Tool Structures by the Dynamic Data System Method," Proc. 12th Annual North American Manufacturing Research Conference, Houghton, MI, 381-385 (with Y. C. Shin and S. M. Wu) (1984). [PDF Version] 23. "Identification of the Transfer Function of the Dynamic Cutting Processes--A Comparative Assessment," Intl. Journal of Machine Tool Design and Research, 25(1), 75-90, (with T. Y. Ahn and S. M.Wu) (1985). [PDF Version] 24. "Identification of Engineering Systems with the Recursive Multichannel Maximum Entropy Method," 12th Conference on Production Research and Technology, Madison, WI, 57-61 (1985). [PDF Version] 25. "Analysis of Three-Dimensional Cutting Process Dynamics," Transactions of ASME: Journal of Engrg. for Industry, 107(4), 336-342 (with S. Yang and S. M. Wu) (1985). [PDF Version] 26. "Cutting Dynamics Identification by Dynamic Data System (DDS) Modeling Approach," Transactions of ASME: Journal of Engrg. for Industry, 107(2), 91-94 (with T. Y. Ahn and S. M. Wu) (1985). [PDF Version] 27. "Transfer Function of Cutting Dynamics in Three- Dimensional Cutting," Proc. 13th Annual North American Manufacturing Research Conference, Berkeley, CA, 476-481 (with I. N. Tansel) (1985). [PDF Version] 28. "Dynamic Assessment of the Trajectory Errors for Robots," Proc. 13th Annual North American Manufacturing Research Conference, Berkeley, CA, 546-550 (with S. H. Lee and B. T. Wu) (1985). [PDF Version] 29. "A New Approach to Form Accuracy Control in Machining," International Journal of Production Research, 24 (4), 825-838 (1986), also Toward the Factory of the Future H. -J. Bullinger and H. J. Warnecke, eds.(Proc. 8th International Conference on Production Research, Stuttgart, West Germany), Springer Verlag, 416-424 (1986). [PDF Version] 30. "Time Domain Approach to Multiple Input Modal Analysis," Proc. 14th Annual North American Manufacturing Research Conference, Minneapolis, MN, 471-478, (with D. W. Cho and S. M. Wu) (1986). [PDF Version] 31. "Feasibility of Form Accuracy Identification and Control in Cylindrical Grinding," Intl. Journal of Machine Tool Design and Research, 26(3), 259-266 (with K. H. Kim and S. M. Wu) (1986). [PDF Version] 32. "A New Method for Measuring and Compensating Pitch Error in the Manufacturing of Lead Screws," Intl. Journal of Machine Tool Design and Research, 26(4), 359-367 (with Q. Zhou and O. Anlagan) (1986). [PDF Version] 33. "Determination of Inner and Outer Modulation Dynamics in Orthogonal Cutting," Transactions of ASME: Journal of Engrg. for Industry, 109(4), 275-280 (with T. Y. Ahn and S. M. Wu) (1987). [PDF Version] 34. "Analysis of Alignment Errors in a Laser-Based In-Process Cylindricity Measurement System," Transactions of ASME: Journal of Engrg. for Industry, 109(4), 321-329 (with K. Kim and S. M. Wu) (1987). [PDF Version] 35. "A Linear Approach to Machine Tool Structural Dynamics Identification," ASME: Intelligent and Integrated Manufacturing Analysis and Synthesis, C. R. Liu, A. Requicha, S. Chandrasekar, eds., PED-Vol. 25, 167- 180, (1987). [PDF Version] 36. "In Process Control of Cylindricity in Boring Operations," Transactions of ASME: Journal of Engrg. for Industry, 109(4), 291-296 (with K. Kim and S. M. Wu) (1987). [PDF Version] 37. "A New Time Domain Multiple Input Modal Analysis Method," Transactions of ASME: Journal of Engrg. for Industry, 109(4), 377-384 (with D. W. Cho and S. M. Wu) (1987). [PDF Version] 38. "An Analysis of the Drill Wandering Motion," Transactions of ASME: Journal of Engrg. for Industry, 109(4), 297-305 (with S. J. Lee and S M. Wu) (1987). [PDF Version] 39. "Present and Future Trends in Stochastic Analysis of Cutting and Structural Dynamics," Proc. 15th Annual North American Manufacturing Research Conference, Bethlehem, PA, 426-432 (with S. M. Wu) (1987). [PDF Version] 40. "Development of a Forecasting Compensatory Control System for Cylindrical Grinding," Transactions of ASME: Journal of Engrg. for Industry, 109(4), 385-391 (with K. H. Kim and S. M. Wu) (1987). [PDF Version] 41. "Analysis of Dynamic Tracking Errors of Robots," Proc. 9th International Conference on Production Research, Cincinnati, OH, 2, 1941-1946 (with B. T. Wu); also in Recent Developments in Production Research, A. Mital, ed. (1987). [PDF Version] 42. "Adaptive Trajectory Planning for Industrial Robots," Proc. 5th International Conference on Systems Engineering, Dayton, OH, 173-176, (with A. S. C. Bose and S. M. Wu) (1987). [PDF Version] 43. "A Generalized Geometric Error Model for Multi-Axis Machines," Annals of CIRP, 36(1), 253-256 (with B. T. Wu and M. F. DeVries) (1987). [PDF Version] 44. "A New Method for the Adaptive Control of Machine Tools," ASME: Quality, Design, Planning and Control, R. E. DeVor, S. G. Kapoor, eds., PED-Vol. 27, 7-21, (with S. D. Fassois and S. M. Wu) (1987). [PDF Version] 45. "Pattern Recognition for On-Line Chatter Detection," Mechanical Systems and Signal Processing, 2(3), 279-290, (with D. W. Cho) (1988). [PDF Version] 46. "An In-Process Flatness Error Measurement and Compensatory Control System," Transactions of ASME: Journal of Engrg. for Industry, 110(?), 263-270, (with C. W. Park and S. M. Wu) (1988). [PDF Version] 47. "Autoregressive Moving Average Models for Experimental Modal Analysis," Proc. of the International Conference on Machine Dynamics and Engineering Applications, Xi'an, PRC, B8-B13, (1988). [PDF Version] 48. "Manipulator Collision Avoidance by Dynamic Programming," Proc. 16th Annual North American Manufacturing Research Conference, Urbana-Champaign, IL, 328-335, (with J. Cesarone) (1988). [PDF Version] 49. "Real-Time Compensation of Geometrical and Kinematic Errors of a Multiaxis Machine," Proc. USA-Japan Symposium on Flexible Automation, Minneapolis, MN, 2, 1069-1074, (with P. D. Lin) (1988). [PDF Version] 50. "Sensitivity Analysis of the Discrete-to-Continuous Dynamic System Transformation," Transactions of ASME: Journal of Dynamic Systems, Measurement and Control, 112(1), 1-9,(with S. D. Fassois and S. M. Wu) (1990); also in Proc. USA-Japan Symposium on Flexible Automation, Minneapolis, MN., 2, 1103-1104, (1988). [PDF Version] 51. "Forecasting Compensatory Control (FCC) of Machining Flatness," Intl. Journal of Machine Tools and Manufacture, 28(1), 59-67, (with C. W. Park and S. M. Wu), (1988). [PDF Version] 52. "A Suboptimum Maximum Likelihood Approach to Parametric Signal Analysis," Transactions of ASME: Journal of Dynamic Systems, Measurement and Control 111(2), 153-159, (1989); also presented at the 1988 JACC, (with S. D. Fassois and S. M. Wu), (1989). [PDF Version] 53. "The Theoretical Stability Chart of Machine Tools - A Development of S. A. Tobias' Theory," Intl. Journal of Machine Tools and Manufacture, 29(2), 267-274, (with X. G. Yang, J. W. Chen, and S. Z. Li) (1989). [PDF Version] 54. "A Unified Approach to the In-Process Identification of the Closed Loop Machining Dynamics in Turning," Transactions of the North American Manufacturing Research Institution of SME 1989, Columbus, OH, 235-242, (with Y. C. Shin) (1989). [PDF Version] 55. "Trajectory Control in the World Coordinate System by an Adaptive Forecasting Algorithm," International Journal of Production Research, 27(3), 451-461, (with S. H. Lee and S. M. Wu) (1989). [PDF Version] 56. "Mobile Robot Routing with Dynamic Programming," Journal of Manufacturing Systems, 8(4), 257-265 (with J. Cesarone) (1989).[PDF Version] 57. "Scallop Removal in Die Finishing By Tertiary Cutter Motion," ASME: Computer Aided Design and Manufacture of Dies and Molds, K. Srinivasan and W. R. DeVries, eds., Chicago, IL, 29-44, (1988); also in Transactions of ASME: Journal of Engrg. for Industry, 111(3), 213-219, (with S. J. You) (1989). [PDF Version] 58. "A Computationally Efficient Interpolator for Robotic Manipulators," Transactions of the North American Manufacturing Research Institution of SME 1989, Columbus, OH, 287-292, (with S. J. Lym) (1989). [PDF Version] 59. "Identification of Joint Parameters for a Taper Joint," Transactions of ASME: Journal of Engrg. for Industry, 111(3), 282-287, (with T. R. Kim and S. M. Wu), (1989). [PDF Version] 60. "Experimental Complex Modal Analysis of Machine Tool Structures," Transactions of ASME: Journal of Engineering for Industry, 111, (???), 116-124, (1989). [PDF Version] 61. "Identification of Joint Parameters for a Taper Joint," Transactions of ASME: Journal of Engineering for Industry, 111(3), 282-287, (with T. R. Kim and S. M. Wu) (1989). [PDF Version] 62. "Synthesis and Generation of Polished Surfaces," ASME: Mechanics of Deburring and Surface Finishing Processes, R. J. Stango and P. R. Fitzpatrick, eds., PED-Vol. 38, 41-62, ( with S. J. You) (1989). [PDF Version] 63. "A Fast Algorithm for On-Line Machining Process Modeling and Adaptive Control," Transactions of ASME: Journal of Engrg. for Industry, 111(2), 133-139, (with S. D. Fassois and S. M. Wu), (1989). [PDF Version] 64. "A Linear Time-Domain Method for Structural Dynamics Identification," Transactions of ASME: Journal of Vibration and Acoustics, 112(1), 98-106, (with S. D. Fassois and S. M. Wu), (1990). [PDF Version] 65. "The Phase Shift Between Successive Waves in Dynamic Metal Cutting," ASME: Modeling of Machine Tools: Accuracy, Dynamics, and Control, P.M. Ferreira, S. G. Kapoor and A. C. -Y. Wang eds., PED-Vol. 45, 101-120, (with D. Parthimos) (1990). [PDF Version] 66. "In-Process Identification of the Milling Operation," Intl. Journal of Machine Tools and Manufacture, 30(3) 325-337 (with D. W. Cho) (1990). [PDF Version] 67. "The Feasibility of a New Method for Scallop Removal in Die Milling," SAE: Recent Developments in Autobody Stamping Technology, SP-825, Detroit, MI, 109-118, (with S. J. You) (1990), also to appear in the 1990 SAE Transactions.[PDF Version] 68. "Practical Implementation of Tertiary Cutter Motions for the Improvement of 3-D Sculptured Surface Characteristics in Milling," Transactions of the North American Manufacturing Research Institution of SME 1990, 222-229, University Park, PA (with M. S. Hong) (1990). [PDF Version] 69. "On-line Implementation of Self Tuning Adaptive Control for Industrial Robots," Proc. Int. Conf. on Microcomputer Applications, Los Angeles (with S. C. Bose) (1989). [PDF Version] also in Microcomputer Applications, 9(2), 40-43, (1990). [PDF Version] 70. "Grinding Wheel Profile Definition for the Manufacture of Drill Flutes," Annals of CIRP, 39(1), 153-156, (1990). [PDF Version] 71. "Sensitivity Analysis of the Discrete-to-Continuous Dynamic System Transformation," Transactions of ASME: Journal of Dynamic Systems, Measurement and Control, 112(1), 1-9,(with S. D. Fassois and S. M. Wu) (1990); also in Proc. USA-Japan Symposium on Flexible Automation, Minneapolis, MN., 2, 1103-1104, (1988). [PDF Version] 72. "Solution Principles for a New Generation of Precision Self-Correcting Multi-Axis Machines," USA-Yugoslav Workshop on Robotics and Artificial Intelligence in CIM, Belgrade, (1990). also in Robotics and Computer Integrated Manufacturing, 7(3/4), 357-364, (1990). [PDF Version] 73. "Computer Synthesis of Three-Dimensional Surfaces," Wear, 145, 29-42, (with S. J. You) (1991). [PDF Version] 74. "Vibrations of a Filamentary Brush in Contact with a Solid Roll," Transactions of the North American Manufacturing Research Institution of SME 1991, 204-210, Rolla, MO (withJ. H. Heo) (1991). [PDF Version] 75. "Synthesis and Generation of Surfaces Milled by Ball Nose End Mills Under Tertiary Cutter Motion," Transactions of ASME: Journal of Engineering for Industry, 113(1), 17-24, (with S. J. You) (1991). [PDF Version] 76. "A Method for Substructural Sensitivity Synthesis," Transactions of ASME: Journal of Vibration and Acoustics, 113(2), 201-208, (with J. S. Heo) (1991). [PDF Version] 77. "Efficient Manipulator Collision Avoidance by Dynamic Programming," Robotics and Computer Integrated Manufacturing, 8(1), 35-44, (with J. Cesarone), (1991). [PDF Version] 78. "Modeling and Experimental Analysis of Margin Forces in Microdrilling," ASME: Manufacturing Processes and Materials Challenges in Microelectronic Packaging, W.T. Chen, P. Engel, W.E. Jahsman, editors, AMD-Vol.-131/EEP-Vol. 1, 25-33, (with C. Lin and, M. N. Jalisi), (1991). [PDF Version] 79. "In-Process Measurement of Roundness and Cylindricity," (Invited paper), ASME: Sensors, Controls, and Quality Issues in Manufacturing, T.I. Liu, C.H. Menq, N.H. Chao, editors, PED-Vol. 55, 59-71, (with C. Lin ), (1991). [PDF Version] 80. "Planar Micro-Drill Point Design and Grinding Methods," Transactions of the North American Manufacturing Research Institution of SME, Vol. XX, pp. 173-179, (with S. K. Kang, and C. Lin) (1992). [PDF Version] 81. "Sensitivity Analysis and Tolerance Allocation for a Micro-Planar Drill Point Grinder,", Annals of CIRP, Vol. 41(1), 361-365, (with S.K. Kang and C. Lin), (1992). [PDF Version] 82. "Deep-Hole Microdrilling," Cutting Tool Engineering, 44(1), 51-54, (with C. Lin and S. Kang), (1992). [PDF Version] 83. "Volumetric Error Compensation for Multi-Axis Machines," Proceedings: 1992 IEEE International Conference on Systems, Man, and Cybernetics, Chicago, October 18-21, 183-188, (with S. M. Wang) (1992). [PDF Version] 84. "A Model for the Stress Field Around the Shear Zone," Transactions of the North American Manufacturing Research Institution of SME 1993,, (with D. T. Parthimos), (1993). [PDF Version] 85. "Direct Volumetric Evaluation for Multi-Axis Machines," Intl. Journal of Machine Tools and Manufacture, 33(5), 675-693, (with P. D. Lin) (1993). [PDF Version] 86. "An Optical Sensor for Seam Tracking," International Journal of Microcomputer Applications, 12(2), 54-60, (with B. Bahr), (1993). [PDF Version] 87. "Training for Manufacturing," IEEE Spectrum, September 1993, 76-81, (with P. C. Jones), (1993). [PDF Version] 88. "Comparative Analysis of Planar and Helical Micro-Drill Points," Transactions of the North American Manufacturing Research Institution of SME 1993, XXI, 189-196, (with S. K. Kang and C. Lin) (1993). [PDF Version] 89. "A Cutting Force Model for Face Milling Operations," in print Intl. Journal of Machine Tools and Manufacture, 33(5), 651-673, (with H. S. Kim) (1993). [PDF Version] 90. "Feasibility of Tool Wear Monitoring by Discrete Cutting Dynamics Modeling," ASME: Manufacturing Science and Engineering, Edited by K. F. Ehmann, PED-Vol. 64. 225-233, (with W. T Kwon) (1993). [PDF Version] 91. "Active Suppression of Chatter by On-line Variation of the Rake and Clearance Angles - Principles and Experimental Investigations," Transactions of ASME: Journal of Engineering for Industry, 34(7) 981-990, (with Z. Mei, S. Yang, H. Shi and S. Chang) (1994). [PDF Version] 92. "Sensory Guidance of Seam Tracking Robots," Journal of Robotic Systems, 11(1) pp. 67-76, (with J. T. Huang, B. Bahr) (1994). [PDF Version] 93. "Automated Evaluation of Volumetric Errors of a Multi-Axis Machine," Transactions of the North American Manufacturing Research Institution of SME 1994, XXII, 291-296, (with S. M. Wang) (1994). [PDF Version] 94. "Compensation of Geometric and Quasi-Static Deformation Errors of a Multi-Axis machine," Transactions of the North American Manufacturing Research Institution of SME 1994, XXII, 283-289, (with S. M. Wang) (1994). [PDF Version] 95. "Surface Topography Control in Single-Point Cutting," Proceedings of the First S.M. Wu Symposium on Manufacturing Science, May 27-28, 1994, Evanston, IL, 1, 43-52, (with C. J. Wang and M. S. Hong) (1994). [PDF Version] 96. "Influence of Cutting Conditions on the Chatter Frequency of a Machining System" Proceedings of the First S.M. Wu Symposium on Manufacturing Science, May 27-28, 1994, Evanston, IL, 1, 153-159, (with Z. L. Zhang) (1994). [PDF Version] 97. "A Generalized Model of the Surface Generation Process in Metal Cutting," Annals of CIRP, Vol. 43(1), 483-486, (with M. S. Hong) (1994). [PDF Version] 98. "Experimental Analysis of Initial Penetration in Drilling," TMS & ASME: Materials Issues in Machining - II and the Physics of Machining Processes - II, Edited by D.A. Stephenson and R. Stevenson, 383-407, (with C. Lin and M. N. Jalisi) (1994). [PDF Version] 99. "An Experimental Investigation on the Wear and Performance of Micro-Drills," ASME: Tribology In Manufacturing Processes, Edited by K. Dohda, S. Jahanmir, W.R.D. Wilson, CRTD-Vol. 30, Trib-Vol. 5, PED-Vol. 69, 145-157, (with W. S. Chen) (1994). [PDF Version] 100. "Tool Wear Monitoring by Using the Imaginary Part of the Transfer Function of the Cutting Dynamics," Intl. Journal of Machine Tools and Manufacture, 34(3), 393-406, (with W. T. Kwon) (1994). [PDF Version] 101. "Development of Micro-Drill Technology," Proceedings 1st International Machining and Grinding Conference, Dearborn, MI, September 12-14, 1995, MR95-173, 227-247, (with H. C. Chyan and W. S. Chen) (1995). [PDF Version] 102. "Error Model and Accuracy Analysis of a Six-DOF Stewart Platform," ASME: Mechatronics for Manufacturing, Edited by C.J . Li, (with S. M. Wang) (1995). [PDF Version] 103. "Chatter in Rolling," Transactions of the North American Manufacturing Research Institution of SME 1995, XXIII, 13-19, (with I. S. Yun and W. R. D Wilson) (1995). [PDF Version] 104. "Passive and Active Error Compensation of Multi-Axis Machines," Proceedings of the First World Congress on Intelligent Manufacturing Processes and Systems, Mayaguez/San Juan, Puerto Rico, February 13-17, Vol. 2, 1105-1116, (with P. D. Lin and S. M. Wang) (1995). [PDF Version] 105. " Drill Wandering Motion: Experiment and Analysis," International J. Mech. Sci., Vol 37, (with A. C. Wijeyewickrema and L. M. Keer) (1995). [PDF Version] 106. "Parametric Modeling of 3-D Surfaces," MED Vol. 3-2, Manufacturing Science and Engineering, ASME 1995, pp. 1203-1211, (with M. Wieczorowsky and A. Cellary), (1995). [PDF Version] 107. "Generation of Engineered Surfaces by the Surface-Shaping System," Intl. Journal of Machine Tools and Manufacture, in print (with M.S. Hong) (1995). [PDF Version] 108. "Three-Dimensional Surface Characterization by Two-Dimensional Autoregressive Models," Transactions of ASME: Journal of Tribology, 94-Trib-42, 117(3), 385-393, (with M. S. Hong) (1995). [PDF Version] 109. "A Fast Interpolation Algorithm for Temporally Nonequidistant Waypoints," Transactions of ASME: Journal of Engineering for Industry, in print, (with S. J. Lym) (1995). [PDF Version] 110. "Helical Micro-Drill Point Design and Grinding," Transactions of ASME: Journal of Engineering for Industry, 117(3), pp. 277-287, (with C. Lin and S. K. Kang) (1995). [PDF Version] 111. "Error Model of a Six-DOF Stewart Platform," MED Vol. 3-1, Manufacturing Science and Engineering, ASME 1995, pp. 519-530, (with S. M. Wang), (1995). [PDF Version] 112. Trojwymiarowa Analiza Chropowatosci Powierzchni za Pomoca Autoregresji, Proceedings: Metrologia W Technikach Wytwarzania Maszyn, VI Konferencji Naukowo-Technicznej, Rzeszow, Poland, pp. 43-54, (with, M. Wieczorowski, and A. Cellary) (1995). [PDF Version] 113. "Inverse Error Analysis for Multi-Axis Machines," Transactions of ASME: Journal of Engineering for Industry, 118(1), 88-94, (with P. D. Lin) (1996). [PDF Version] 114. "A Comparative Analysis of 2D and 3D Bearing Area Curves," Proceedings of the Second S.M. Wu Symposium on Manufacturing Science - USA Venue, pp. 196-200, (with A. Cellary and M. Wieczorowski) (1996). [PDF Version] 115. "Development of Helical Micro-Drill Technology," Proceedings NSF Design and Manufacturing Grantees Conference, Albuquerque, NM, January 3-5, in print, (1996). [PDF Version] 116. "Sensing of Motion Related Errors in Multi-Axis Machines," Transactions of ASME: Journal of Dynamic Systems, Measurement, and Control, 118(3), pp. 425-433, (with P. D. Lin) (1996). [PDF Version] 117. "A CAD Approach to Helical Groove Machining: Part 1 - Mathematical Model and Model Solution," Intl. Journal of Machine Tools and Manufacture, 36(1), 141-153, (with S. K. Kang and C. Lin) (1996). [PDF Version] 118. An Overview of Accuracy Analysis and Error Compensation for a Stewart Platform, Proc. 26th International Conference of Production Engineering, Podgorica-Budva, Yugoslavia, September 17-20, pp. 605-610, (with S.M. Wang), (1996). [PDF Version] 119. "A Numerical Model for the Cutting Forces and the
Surface Topography in Face Milling Operations," Proceedings
of the Second S.M. Wu Symposium on Manufacturing Science - 120. A CAD Approach to Helical Groove Machining. Part 2: Numerical Evaluation and Sensitivity Analysis, Int. J. Mach. Tools Manufact., 37(1), pp. 101-107, (with S.K. Kang and C. Lin), (1997). [PDF Version] 121. "A Framework for a Virtual Machine Tool (VMT)," Technical Papers of NAMRI/SME, pp. 143-148, (with R.E. DeVor, E.C. DeMeter, D. Dornfeld, S. Kapoor, J. Ni, K. Rajurkar, Y. Shin, and J. Sutherland), (1997). [PDF Version] 122. "Design and Analysis of Helical Drill Points," Transactions of NAMRI/SME, pp. 135-140, (with H.C. Chyan), (1997). [PDF Version] 123. Volumetric Error Analysis of a Stewart Platform Based Machine Tool, Annals of CIRP, 46(1), pp. 287-290, (with A. Patel), (1997). [PDF Version] 124. Machining Process Modeling - A Review, Invited Paper, Transactions of ASME: J. of Manufacturing Science and Engineering, 119, pp. 655-663, (with S.G. Kapoor, R.E. DeVor, and I. Lazoglu), (1997). [PDF Version] 125. Review of Chatter Studies in Cold Rolling, Int. J. of Machine Tools and Manufacture, 38, pp. 1499-1530, (with I.S. Yun and W.R.D. Wilson), (1998). [PDF Version] 126. Chatter in the Strip Rolling Process, Part I: Dynamic Model of Rolling, Trans ASME: J. of Manufacturing Science and Engineering, 120(2), pp. 330-336, (with W.R.D. Wilson and I.S. Yun), (1998). [PDF Version] 127. Chatter in the Strip Rolling Process, Part II: Dynamic Rolling Experiments, Trans ASME: J. of Manufacturing Science and Engineering, 120(2), pp. 337-342, (with W.R.D. Wilson and I.S. Yun), (1998)[PDF Version] 128. Chatter in the Strip Rolling Process, Part III: Chatter Model Trans ASME: J. of Manufacturing Science and Engineering, 120(2), pp. 343-348, (with W.R.D. Wilson and I.S. Yun), (1998)[PDF Version] 129. Development Of Curved Helical Micro-Drill Point Technology For Micro-Hole Drilling, Mechatronics, 8, pp. 337-358, (with H. C. Chyan), (1998) (Invited).[PDF Version]
130. "Measurement Methods for the Position Errors of a Multi-Axis Machine - Part I: Principle and Sensitivity Analysis," Int. J. of Machine Tools and Manufacture, 39(6), pp.951-964, (with S. M. Wang), (1999). [PDF Version] 131. "Measurement Methods for the Position Errors of a Multi-Axis Machine - Part II: Applications and Experimental Results," Int. J. of Machine Tools and Manufacture, 39(9), pp.1485-1505, (with S. M. Wang), (1999). [PDF Version] 132. Stability Analysis of Chatter on a Tandem Rolling Mill, Transactions of NAMRI/SME, Vol. 27, pp. 61-66, (1999), also in Journal of Manufacturing Processes, Vol. 2, No. 4, pp. 217-224, (2000) (with P-H. Hu).[PDF Version] 133. Determination of Constant 3D Cutting Force Coefficients and of Runout Parameters in End Milling, Transactions of NAMRI/SME, Vol. 27, pp. 87-92, (with W.S. Yun and D.W. Cho), (1999). [PDF Version] 134. Identification and Control for Micro-drilling Productivity Enhancement, Int. J. of Machine Tools and Manufacture, 39, pp. 1539-1561, (with M.S. Cheong, D.W., Cho), (1999). [PDF Version] 135. Calibration of a Hexapod Machine Tool Using a Redundant Leg, Int. J. of Machine Tools and Manufacture, Vol. 40, pp. 489-512 (with A. Patel), (2000). [PDF Version] 136. Tapered-Web Helical Groove Machining, Proc. Instn. Mech. Engnrs.: Journal of Engineering Manufacture, Vol 213, Part B, pp. 779-785, (with H. C. Chyan), (1999). [PDF Version] 137. Prediction of Hole Quality in Drilling,Proc. NSF Grantees Conference, in print, (with R.E. DeVor, S.G. Kapoor, and J. Ni), 2000.[PDF Version] 138. The Frequency Content of Turned Surface Profiles, Trans. NAMRI/SME, Vol. 28, pp. 191-196, (with K. Kim) (2000). [PDF Version] 139. Stability Analysis of Chatter on a Tandem Rolling Mill,
Journal of Manufacturing Processes, Vol. 2, No. 4, pp.
217-224, (with, P.H. Hu), 2000.[PDF
Version] 141. A Dynamic Model of the Rolling Process II. Inhomogeneous Model, International Journal of Machine Tools and Manufacture, Vol. 40, No.1, pp. 21-31, (with, P.H. Hu), (2000). [PDF Version] 142. "Design and Implementation of a Helical Drill Point Grinder," Trans. of NAMRI/SME, (w/ S. Ganglani), in print, 2001.[PDF Version] 143.
Fifth-Octave Mode
Chatter in Rolling, Proc. Inst. Mech. 144. "Curved Helical Drill-points for Micro-hole Drilling," Proc. Instn Mech. Engrs Part B: Journal of Engineering Manufacture, (With H.C. Chyan), Vol. 216, pp. 61-75.[PDF Version] 145. Regenerative Effect in Rolling Chatter, Journal of Manufacturing Processes, (with, P.H. Hu), Vol. 3, No.2, pp. 82-93, 2001.[PDF Version] 146. Mechanistic Model For Dynamic Forces In Micro-Drilling, Proc. IMECE 2001, New York, NY, (with Y. Gong), in print.[PDF Version]
147. Development of Meso-Scale Machine Tool (mMT) Systems, Transactions of NAMRI/SME, Vol. 30, pp. 653-661, 2002 (w/ Michael P. Vogler, Xinyu Liu, Shiv G. Kapoor, Richard E. Devor). [PDF Version] 148. Development of a Meso-scale Machine Tool (mMT) for Micro-machining, Proceedings 2002 Japan- USA Symposium on Flexible Automation, July 14-19, 2002, Hiroshima, Japan (w/ R. Subrahmanian), Volume 1, pp. 163-169.[PDF Version] 149. Manufacturing Engineering Education: A Unified Approach, Trans of the Committee of Manufacturing Engineering Chairs/Coordinators (COMEC), Volume 1, pp. 46-50, 2002 (w/W. Hopp). Also SME Technical Paper ED02-260.[PDF Version] 150. Development and Performance Analysis of New Spade Bit Designs, Int. J. Machine Tools and Manufacture, (w/ H. Zhao) 42, pp.1403-1414, 2002.[PDF Version] 151. Development of a virtual machining system, part 1: approximation of the size effect for cutting force prediction (with Jeong Hoon Ko, Won-Soo Yun, Dong-Woo Cho), International Journal of Machine Tools & Manufacture 42 (2002) 15951605.[PDF Version] 152. Development of a virtual machining system, part 2: prediction and analysis of a machined surface error, (with Jeong Hoon Ko, Won-Soo Yun, Dong-Woo Cho), International Journal of Machine Tools & Manufacture 42 (2002) 16071615.[PDF Version] 153. Development of a virtual machining system, part 3: cutting process simulation in transient cuts, (with Jeong Hoon Ko, Won-Soo Yun, Dong-Woo Cho), International Journal of Machine Tools & Manufacture 42 (2002) 16171626.[PDF Version] 154. Micro/Meso-scale Mechanical Manufacturing Manufacturing Opportunities and Challenges-, Proceedings, JSME/ASME International Conference on Materials and Processing, Ocober 15-18, Honolulu, HI, Vol. 1 pp. 6-13, 2002, (Keynote presentation).[PDF Version] 155. Analysis of Dynamic Characteristics of Micro-Drills, Journal of Materials Processing Technology, (with Y. Gong and C. Lin), Vol. 141 (2003), pp. 16-28.[PDF Version] 156. Mechanistic Model for Spade Drills for Wood Drilling Operations, Part 1: Model Development, (with H. Zhao), Trans ASME. J. of Manufacturing Science and Engineering, 125 (2003), No 2, 226-235.[PDF Version] 157. Mechanistic Model for Spade Drills for Wood Drilling Operations, Part 2: Analysis of Spade Bit Geometry and Performance, (with H. Zhao), Trans ASME. J. of Manufacturing Science and Engineering, 125 (2003), No 2, 236-244.[PDF Version] 158. The Feasibility of Eigenstructure Assignment for Machining Chatter Control, Int. J. Machine Tools and Manufacture, (w/ C.H. Chiou, M.S. Hong), Vol. 43 (2003), pp. 1603-1620.[PDF Version] |
